Function
The Timezone & NTP page allows you to set the time zone, time, and NTP server information. Table 1 describes the parameters.
NOTE: You can click MM time at the lower right corner of any page to go to the Timezone & NTP page.
Parameter |
Description |
|---|---|
Time Zone |
Time zone for the system. NOTE:
If the system supports daylights saving time (DTS), the system time will be automatically adjusted based on the DTS. |
Time |
System time. You can manually set the time or select Sync to synchronize the system time with the PC used for accessing the MM910 WebUI. NOTE:
After setting the time, click Save. You may need to re-login. |
NTP State |
Function of enabling NTP.
|
NTP synchronization status |
Status of time synchronization between the system and the NTP server. |
Preferred NTP Server IP Address |
IP address of the preferred NTP server. The system synchronizes the time with the preferred NTP server. NOTE:
The MM910 only supports Linux NTP servers. |
Secondary NTP Server IP Address |
IP address of an alternative NTP. NOTE:
The MM910 only supports Linux NTP servers. |
The Minimum Poll Interval |
Minimum interval (in seconds) for synchronizing NTP packets. Value: 2n (4 ≤ n ≤ 17) |
The Maximum Poll Interval |
Maximum interval (in seconds) for synchronizing NTP packets. Value: 2n (4 ≤ n ≤ 17) |